What should you do when you’re stuck with an automatic transmission on your vintage muscle car, and you really want a manual? Simple. Make the swap. The big pieces are often the …

2012年5月12日 · I did the conversion a few years ago to my early (5 bolt) 65 cvt. Not particularly difficult, but then, it depends on one's tools chest and skill sets. I have a parts list and a "write …

OEM parts for Automatic to G56 manual transmission conversion. Kit contains Transmission mount, Shifter tower (OEM or B&M) and lever/knob, Interior boot kit, pedal assembly …

2001年3月14日 · I converted my 67 auto to a 4 speed toploader. Pretty easy in the big picture once you know how its supposed to be done and what bolts where. The modern 5 speed …

2009年3月24日 · I'm not sure if the auto mount is the same as the stick, flywheel and master cylinder and lines to the clutch and pedal. The driveshafts are 2 piece on stock mustangs. …

2008年5月27日 · I am planning on converting my 73 auto to a stick. I currently have the entire dash pulled out. This would be a prime time to change out the pedal assemby. My question is, …

2010年3月8日 · MX-5 Miata Forum > All Miatas > Engine Conversions > automatic to stick conversion.. advice? Reply Thread Tools: Display Modes: 20th May 2004, 01:46 #1: Terry …

2011年1月6日 · As hrahm said, if you have a 2.4T the best move you could make is to change it for a 2.3 and work from there. - You need the pedal assembly with clutch pedal form a manual …

2014年4月18日 · I have an '82 2-door Cherokee with 258 L6 and automatic transmission. I would rather have a 5-speed. Is it physically possible to convert from automatic to stick shift? I figure …

2006年1月8日 · Re: Auto to Stick conversion (Singlerounds) Complete information on the procedure and all parts you'll need. http://forums.vwvortex.com/zerothread?id=2030797 And it …