Find the technical documentation you need to build your James Hardie project from start to finish. From clearance requirements to installation videos to CAD files, we've got you covered.

During installation or handling: (1) work in outdoor areas with ample ventilation; (2) use fiber cement shears for cutting or, where not feasible, use a HardieBlade saw blade and dust-reducing circular saw attached to a HEPA vacuum; (3) warn others in the immediate area; (4) wear a properly-fitted, NIOSH-approved dust mask or respirator (e.g. N ...

2024年3月28日 · First, make sure you review the Hardie® Plank lap siding installation instructions, which contain the information you need for proper installation. To help you get started, we'd recommend checking out this helpful video, which shows you how to cut and install starter strips and how to stagger lap siding for improved appearance.

1) Install 1/4” lath strip to ensure consistent plank angle. 2) Begin first course at end of far left wall and nail to stud. 3) Second course begins at the next stud (16” or 24”) to the right

HardiePlank® weatherboard is an 8mm thick weatherboard plank, to be used as external or internal cladding for both new build and renovation projects. To complement the product, both fibre cement and metal trim profiles are available to finish corners, door and window frames.

This document provides installation instructions for James Hardie Hardieplank siding. It covers topics such as storage, handling, cutting, joint treatment, fastener requirements, general fastening requirements, painting, caulking, and ColorPlus technology.

This document is a step by step guide to help installers fix HardiePlank® cladding. For full instructions and warranty information refer to James Hardie® installation instructions which can be found at www.jameshardie.co.uk. For information relating to construction requirements refer to local building codes and standards. Installation ...

cribe design and general installation information for specific James Hardie products. The appendix addresses the installation of James Hard.

Nail Gun James Hardie recommends the Paslode IM45 with fixing size, min. 2.8×32mm with 7mm diameter head. Other first fix gun nailers can be used – Fixing size

HardiePlank® Cladding is a nominally 8 mm thick plank intended as external or internal cladding for residential and commercial buildings both new build and renovation. HardieTrim® NT3TM cladding profiles are 25 mm thick and available in 2 widths and are used to finish corners, door frames and window frames.