2019年10月3日 · This particular customer service rep said that they typically like to do a neck re-adjustment as opposed to altering the saddle, unless it just needs to be taken down only a little …

2018年3月8日 · Taylor will recommend that as a first step, then replacing the saddle and possibly making tiny adjustments to its height as the final tweak. However, that saddle needs to be …

2019年5月22日 · I'm looking at a used Taylor 114E at a local GC, and the string height is far to high for my liking. Everything looks good as far as soundboard, neck and bridge. Is sanding …

2017年11月8日 · Thinking I could easily fix this at home I also bought a spare saddle to sand, just in case the action would not lower by itself in the course of a few weeks, or a truss rod …

2018年3月15日 · I lay the saddle flat on the sandpaper and simply use my fingertips to slide the saddle back and forth over the sandpaper. It's quite easy. The most important thing you want …

2012年3月21日 · Fret at the first and 14th, then check the distance at around the 6-7th fret. That's your gauge. Try 1/4 turn looser (add bow; more relief), and see if that gets you there. BTW, …

2021年12月21日 · It was adjusting the height of the strings (action) and a neck adjustment that required 2 weeks of getting it to the correct humidity. I was sure to find a Taylor certified luthier

2021年8月4日 · The neck can be adjusted to get a great action without ending up with a saddle that’s too low. It can be adjusted to account for something like an inadvertent tall or short …

2017年5月26日 · The good news is that, since it is a Taylor, the neck can be taken off and shimmed to get it to the correct angle. This sets the approximate action height, and it is then …

2019年8月15日 · Adjusting the neck angle is the ideal way to adjust action. Typically people lower the action by filing off the bottom of the saddle. A shorter saddle gives less leverage which …